Semi-Conductor Industries Peek Filled PTFE Rod

Product Description

Product Parameter
PEEK product group:
1. PEEK+Glass fiber
2. PEEK+Carbon fiber
3. Medical grade PEEK, 30 days and permanently implanted are both available.Ceritificate is available.
4. Food grade PEEK 

PEEK are available:
rod, sheet, tube,  part

Quick Detail:

Temperature 250°C resistance Carbon fiber filled PEEK rod
Wide thickness range available: 6mm ~ 50mm
SGS RoHS approved


Description:

Trade names:
Polyether etherketone, Carbon fiber filled PEEK rod
Available Shapes:
Sheets, Rods, Tubes,Plates
Color:
Natural
Rods Diameter:
6.0mm ~ 150mm
Length:
500mm ~ 1000mm or customized

About PEEK Rod & Sheet:

PEEK is a high performance engineering thermoplastic that offers chemical and water resistance similar, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.


Advantages:

Excellent chemical resistance
Very low moisture absorption
Inherently good wear and abrasion resistance
Unaffected by continuous exposure to hot water or steam
High temperature resistant, can withstand 250°C


Key Features:

Strong and stiff plastic
Outstanding chemical resistance
Good mechanical properties at elevated temperatures
Resistant to hot water and steam
Bearing grade PEEK has excellent wear characteristics
UL 94 V-0 flammability rating (0.059" thickness)
Very low smoke and toxic gas emissions when exposed to flame


Applications:

Semiconductor machinery components
Aerospace parts
Seals
Pump and valve components
Bearings and bushings (bearing grade PEEK)
Electrical components
Medical instrument parts
Food processing machinery components


Note: Usually, the color and length can be customized, width will according to the available extrusion mould or molding mould. Tolerance for length, width, diameter and thickness may vary when manufacturing. More information, please feel free to contact us online or by email.

PEEK Technical Data Sheet
Technical Data	Method of Verification	Unit	PEEK
I.Physical Properties
Density	ISO 1183	g/cm3	1.31
Water absorption	ISO 62	%	0.06
II.Mechanical Properties
Tensile strength at yield	ISO 527-2	MPa	97
Tensile strength (psi)	527	MPa	110/-
Tensile Modulus (psi)	527	MPA	4400
Flexural strength (psi)	527	MPa	110/-
Compressive strength (psi)	604	MPA	29/57
Coefficient oflinear expansion(23-100°C)		m/(m.k)	50×10-6
Thermal conductivity	C177	Btu-in/hr-ft2-°F	1.7
Tensile strength at break	ISO 527-2	Mpa	-
Elongation at break	ISO 527-2	%	25
Modulus of elasticity after tensile test	ISO 527-2	MPa	-
Modulus of elasticity after flexural test	ISO 178	MPa	4,200
Hardness-Rockwell	ISO 2039-2		-
Hardness - Shore D	DIN 53505		88
Charpy impact strength at 23 C	ISO 179	kJ/m2	N.B.
Friction coefficient	DIN 53375		0.34
III.Thermal Properties
Heat deflection temperature - HDT/A	ISO 75-2	C	152
Max. service temperature - Short term		C	300
Max. service temperature - Long term		C	260
Thermal conductivity at 23 C	DIN 11359	W/(K*m)	0.25
Coefficient of linear thermal expansion	ISO 11359	10 -4* K -1	0.47
IV.Electrical Properties
Dielectric constant at 1 MHz	IEC 60250	10 6 Hz	3.20
Dielectric loss factor at 1 MHz	IEC 60250	10 6 Hz	0.003
Volume resistively	IEC 60093	Ohm (Ω) * cm	≥10 16
Surface resisively	IEC 60093	Ohm (Ω)	≥10 15
Dielectric strength	IEC 60243-1	kV/mm	19
V.Miscellaneous Data
Flammability	UL 94	Class	V-0
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
Statement:
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. ENERGETIC will not provide any legally binding guarantee of certain properties, or any suitability.

 
 Company Profile



    Yangzhong Dongxu Chemical Plastic Company since its establishment  in 1986,has been rated as ''Heavy contract,and trustworthy with the enterprise"! Company has advanced production testing equipment,rich experience,the staff be trained with regularity team;raw materials and adequate product inventory for customers to provide timely sealing products and a professional and technical engineers to provide comprehensive Technical support.
    Company to ISO9001 quality system authentication enterprise as the standard,the enterprise quality assurance system more perfect,Yangzhong Dongxu chemical plastic Company Limited will be the spirit of sincere cooperation,advanced enterprise management,strict the style of work,and you work together,create brilliant!
  
Payment and Delivery
 

Our Service 
1. Providing technical consultation.
2. Samples  are free. 
3. Special packaging according to request. 
4. Providing related qualification documents. 
5. We could customize various products with your brand logo according to your requirements. 
6. Solving the quality matter on production line. 
7. Solving customer's complaints in time .
10.We make full inspection during the production, and we also make sampling test before delivery.

FAQ
1) How can I place order? 
A: You can contact us by email about your order details, or place order on line. 

2) How can I pay you? 
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using. 

3) What's the order procedure? 
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. 

4)How do you take care when your clients received defective products? 
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment. 

5)How do you check all the goods in the production line? 
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.